How To Mend A Record That Skips And Jumps…With A Toothpick

mending a scratched record with a toothpick

It is possible to mend a scratched record – and I’ve done it!

Mending a broken record is the holy grail for many record collectors. 

It also gives you a tremendous feeling of satisfaction when you succeed.High Tide and Green Grass Rolling Stones

When I say “broken” I mean an old record in one piece that nevertheless skips or jumps, presumably because of dirt or a scratch, or both.

A couple of years ago, I found a copy of The Rolling Stones’ first “Hits” compilation “High Tide and Green Grass” in a bargain bin at a record fair. It was priced at a *steep* £1, but the cover was glossy (albeit creased), with a large six page “book” of photos and it was an unboxed green Decca label, dating it to when the record was first released. Even if the record was scratched, I reasoned, trying to justify the lavish expenditure to myself, it was still worth it for the cover.

The inside cover of The Rolling Stones' High Tide and Green Grass The inside cover of The Rolling Stones’ High Tide and Green Grass

Sure enough, as I took it home and played the thing it took about thirty seconds into opening track “Have You Seen Your Mother Baby (Standing In The Shadows)?” for the record to skip (the rest of the record was fine). I sighed a resigned sigh, accepting the old adage that when something looks too good to be true, that’s usually because it is.

And that was that, until I heard about a method of mending scratched records using a toothpick. “Surely that wouldn’t work?” I mused sceptically, as I do most things, but given that I had nothing to lose except the pound I had spent on my jumping copy of “High Tide and Green Grass” I decided to give it a go.

Against all reasonable odds and expectations, it worked.

Rather than keep the method to myself and become a millionaire operating a clinic fixing broken records, I thought I would share the method here….I know, I know – I’m a fool to myself, but I’m generous like that. Here it is:

One toothpick: unused. One toothpick: unused.

Step 1. Grab a wooden toothpick. I found one in a restaurant and pocketed it. NB. Don’t use it for its intended purpose first. That’s unpleasant.

Note hand on left slowing the record down. Out of shot: cat about to jump on the turntable. Note hand on left slowing the record down. Out of shot: cat about to jump on the turntable.

Step 2. Locate the area on the record that jumps. This is trickier than it sounds because it is spinning quickly, and black vinyl is deceptively featureless, but I have a method that should help: As the record spins on the turntable, it will skip in the affected area. As it does so, look at the label in the centre to see which bit is pointing to the needle as the record jumps. It took me eight unsuccessful tries before I sussed this somewhat elementary method, which probably says more about me than anything else…

What are you doing you crazy fool? You'll kill us all! What are you doing you crazy fool? You’ll kill us all!

Step 3. Take the record off the turntable and insert the end of the toothpick in the grooves where you reckon the skipping occurs. This feels odd, as we are always advised never to touch the surface of a record, especially with a pointy stick, but it’s okay.

Move the pick back and forth within the groove in the area where the record is affected. In my case there was an area of ingrained dirt that was blocking the needle, causing it to jump and skip. The toothpick dislodged a fairly long streak of dirt that resembled a scratch and all was well. The toothpick wood is soft enough to not unduly damage the record and sufficiently hard to remove the dirt.

NB Don’t try this on CDs. Or cassettes. Or rare paintings, furniture, other people’s faces, pets, cars etc.

A record playing, yesterday. A record playing, yesterday.

Step 4. Play the record to see if you were successful. If not, try steps 1-3 again. As I said before: it worked for me. You can bend the vinyl slightly to open the grooves a little.

Microfibre cloth. Courtesy of Aldi. Microfibre cloth. Courtesy of Aldi.

Step 5: Give the rest of the record a clean. When I buy an old record which is a bit grim, (cleanliness-wise I mean. I don’t mean “when I buy something by Morrissey”) I clean it with a micro-fibre cloth (you can buy two for £1 at Aldi) and a cleaning solution (I use “Into The Groove”, which you can find on eBay. A bottle last for ages).

'Cos you can dance. For inspiration... ‘Cos you can dance. For inspiration…

Have you tried the toothpick method? Did it work? Know any other methods? Do let me know in the comment section.

Was this post helpful? Every Record Tells A Story: A Vinyl Handbook is out now, packed full of vinyl-related advice and the stories behind great records. You can buy the book by clicking this link to the online store

Click here for the wood glue method of cleaning your vinyl


Posted

in

by

Comments

94 responses to “How To Mend A Record That Skips And Jumps…With A Toothpick”

  1. marycigarettes Avatar

    look at that lovely lovely original green decca label…the gered mankowitz photos are terrific.

    Like

    1. Every Record Tells A Story Avatar

      So true. It’s worth a pound just for the photos. The fact it was an original unboxed Decca label was a bonus…

      Like

    2. Diogo Santos Avatar
      Diogo Santos

      THANK YOU SO MUCH it actually worked, i had a huge scratch on my bluesbreakers album the one with a young eric clapton 😉 and it worked it doesnt skip anymore on stepping out track

      Liked by 1 person

      1. Every Record Tells A Story Avatar

        Fantastic! You are very welcome and thank you for letting us know it worked!

        Like

  2. mikeladano Avatar

    I’m scared to try the toothpick method. But if I run into a record that skips, I may as well try. Thanks for the tutorial!

    Like

    1. Every Record Tells A Story Avatar

      It does feel odd taking a toothpick to a record at first – best to try on a record you don’t like. Something by One Direction perhaps…

      Like

      1. mikeladano Avatar

        Good suggestion. I’ll be happy to “fix” one of those! 🙂

        Like

      2. Polly Avatar
        Polly

        Have Wand Erection actually released any vinyl? Not that I’m actually interested of course…

        Like

      3. Every Record Tells A Story Avatar

        Heh. Yes – they did on record store day this year. Check your local bargain bin…

        Like

  3. Fresh Ginger Avatar

    Cool idea — I’m terrified to try it. But, maybe …

    Like

    1. Every Record Tells A Story Avatar

      Practice on something you found in a garage sale or charity shop. It definitely works – I have used it on a couple of records now.

      Like

    2. Maria Avatar
      Maria

      It worked! I’m a new collector and I had been so heartbroken with some of my records skipping but this trick did it. Now I’m itching to try it on more! Just a reminder that I should probably clean my records more often lol

      Liked by 1 person

  4. J. Avatar
    J.

    Nice! I have a couple o’ records that I’ll try this out on! … I’ll let you know how I get on!

    Like

    1. Every Record Tells A Story Avatar

      Excellent! Please do…

      Like

  5. […] – there was a scratch at the start of it. Fortunately, I have a method to fix that (click here to read how to fix a record that skips and jumps) and it worked like a […]

    Like

  6. Steve Fruitman 33.45.78 Radio Show Avatar

    I don’t know what ppl are scared about – a fucked up record is a fucked up record so how can you possibly make it any worse? Just watched the ‘wood-glue’ demo and thought the same thing. Might as well try to improve it instead of being scared of damaging it further. I mean, if it doesn’t play…. at least you still have the cover to drool over.

    Like

  7. Joha Avatar
    Joha

    Works for me too, just fixed two records – one by The Doors and one by The Faces!

    Liked by 1 person

  8. Mike Jones Avatar

    Fixed my long jumping Fall LP. Thanks

    Like

    1. Every Record Tells A Story Avatar

      Excellent!
      I just cleaned up a “pop” on a Smiths LP…

      Like

  9. SCCMentor Avatar

    I just put a bit of weight (i.e. a finger) onto the arms and the needle pops out the dirt. Ok prob not the best thing for the needle but I’ve done this since the 70s and fixed loads of jumps.

    Like

    1. Every Record Tells A Story Avatar

      I guess this is a similar principle – although I save risking damage to the stylus by using a toothpick

      Like

  10. jazzdrummer1 Avatar

    Reblogged this on It's A Raggy Waltz and commented:
    This may have just saved my life

    Like

  11. Peter Dean Avatar
    Peter Dean

    Another hint. I had a copy of the “Beatle’s White Album” that had candle wax imbedded in the groove. I tried a lot of the ways suggested on the webb but nothing worked. Then I discovered “GooBeGone”. It dissolved the wax and a final clean in my disc cleaner and it was like new.

    Like

  12. Morgan Young Avatar
    Morgan Young

    Wow this method works amazing. There is no reason to be afraid to put the toothpick to the record. The toothpick eliminates the skip and doesn’t damage the sound.

    Like

  13. Johnny Aitken Avatar
    Johnny Aitken

    Someone on you tube tried very fine sandpaper (yes I know lol) but hey it worked it repaired the damage on the groove surface that was causing the needle to jump. The record looked a bit bad after it but it worked

    Like

  14. Michael Avatar
    Michael

    Some people would say I shouldn’t have done this to a damaged copy of McCartneys Press to Play, but I love this LP so screw you brother or sister. Anyway miracle of miracles the tooth pick popped out a big piece of craps causing the record to skip. Legend man thanks.

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Great to hear! You’re very welcome!

      Like

  15. Denny Fox Avatar

    Fixed some records with this method. I also use eraser for fixin loops: just rub the record in place of looping (in the rotational direction)

    Like

  16. Ellie Avatar
    Ellie

    it didn’t work for me…my original Grease soundtrack. Do you have any other suggestions?

    Like

    1. Every Record Tells A Story Avatar

      For the Grease soundtrack I would suggest a quick visit to any boot sale or charity shop (if you live in the UK) and pick up another copy for a pound.
      There are some records that just can’t be saved…

      Like

  17. Kenroc Avatar
    Kenroc

    Do you think this would work on a 7″ 45 rpm record? I have an extremely rare blank label pressing of a Bob Marley record that has a scratch in it. What do you think? Thanks.

    Like

    1. Every Record Tells A Story Avatar

      Hi – only one way to find out. The principle is the same for any record.

      Like

  18. Sonya Avatar
    Sonya

    It works! Just fixed several skips on a great record show find. I’m doing my happy dance! Now the boyfriend wants me to try it on a couple of his albums, lol. Thanks!

    Liked by 1 person

  19. Rob Avatar
    Rob

    You just saved my copy of Richard Thompson’s ‘Shoot Out The Lights’ that skipped in the first 5 seconds of ‘Shoot Out The Lights’. I wanted to puke every time it jumped. Got it the first time with the tooth pick. Would never have thought of trying that. Thanks!

    Liked by 1 person

  20. TM Avatar
    TM

    WORKED ! Saved a record I had resigned to skipping…. Thanks for taking the time to post!

    Liked by 1 person

  21. CG Avatar
    CG

    I used this method to fix a skip in the Pete Townsend tune, “Heartache”. Thanks!

    Liked by 1 person

  22. SP Avatar
    SP

    Worked for me! My copy of Suggie Otis Freedom Flight is restored! Thanks

    Liked by 1 person

  23. looprication Avatar

    Just tried it on a record that’s had a skip in it for over 30 years, it was the second record I ever bought. And it WORKED! Thanks so much for this!

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Brilliant! Delighted to have been of service!

      Like

  24. Wilhelm Heideman Avatar
    Wilhelm Heideman

    Suggestion:
    For all you younguns’ use your cell phone and snap a pic when the skip occurs.
    For all us old farts, use your rotary dial phone and gently mark your record label with the soft end (just kinding on that one).
    Observation:
    Just the cynic in me, but if this takes off, watch for the record companys to boost the price of toothpicks…and if you are unfortunate enough to live in californicate, USA, our esteemed lawmakers will charge a fee for misuse of food related products OR ban them entirely…all I can say is I’ve seen it before.
    Stock up on toothpicks today before they are $20.00 each!

    Liked by 1 person

  25. Tommy Avatar
    Tommy

    This is great never tried it but I’m going to! I have however used the weighted needle method which works but I don’t recommend as it can cause irreparable damage to your stylus.

    Like

  26. Tommy Kelch Avatar

    I would be more inclined to clean ALL newly acquired records first. If it skips, clean it a second time before attempting any type of methods mentioning the use of dragging or poking anything into record grooves. If it is dirt, the liquid cleaning solution should soften any dirt and make it easier to let go of the record surface….. ( just my opinion of course ). We all want to preserve our records the best way possible.

    Like

  27. Scottie Gee Avatar
    Scottie Gee

    The toothpick method has always worked beautifully for me. It has also been very effective in removing an actual scratch, or a surface scuff that was deep enough to affect the playback. What I did was take a toothpick, put it in a drill and sandpaper the point to a right angle. Then you can carefully “scratch out the scratch” by carefully running the toothpick back-and-forth over the affected area. It works great!

    Liked by 1 person

  28. Renzo Avatar
    Renzo

    What I do is to press the middle a little bit to correct the grooves and it worked!!

    Like

  29. Wilhelm Heideman Avatar
    Wilhelm Heideman

    Just salvaged Procol Hamum Home LP…Whiskey Train is now incredible…cowbell is king!
    Thanks mate!
    Cheers

    Like

  30. 'Vanny Avatar
    ‘Vanny

    Thanks so much, you’ve saved my copy of Brenda Lee’s “All The Way”!!! Wah!!! I’m super happy. And also, cats rule! ^~^

    Liked by 1 person

  31. Aaron Avatar
    Aaron

    Bought a copy of Blind Faiths first album in the cheap bin. Cleaned it and other than one skip area, it played perfectly. Found the spot, could actually feel the toothpick get caught up. Finally after a couple passes it broke free. Perfect album now. Thanks!

    Liked by 1 person

  32. Pj Avatar
    Pj

    I know that ‘tremendous feeling of satisfaction when you succeed..’ I’ve used a fingernail to remove a ‘skip’ that a seller said was reason to sell me an early Elvis record for 50 cents. Turned out it was a fleck of dried ‘something’ (I think a booger.) Trying your toothpick method on yet another Elvis record. But it’s requiring sitting through an irritating ‘Beach Shack’ from LP ‘Spin Out’ about 13 times now, right near the end…”I know girls by the BLIP…I know girls by the BLIP…I know girls by the BLIP…I know girls by the BLIP…I know girls by the BLIP…”
    Not working for this one.. I can’t SEE anything significant that would cause it. Frustrating!

    Like

  33. Kyle C Avatar
    Kyle C

    Dude! It worked! My copy of led zeppelin 1 had a skip and I was dreading having to pay for a new one for todays prices, but this completely fixed the skip! There is a little crackle in that spot now, but hey, you can hear the whole song uninterrupted now. Excellent advice.

    Liked by 1 person

  34. Jonathan Hollick Avatar
    Jonathan Hollick

    Didn’t use a toothpick but I used a velvet pad that I bought back in the 70’s with some washing up liquid and hot water. Scrubbed the track that jumped and voila it plays with just a little “pop” rather than a jump” Really pleased as the dealer let me have the album for free cos of the jump!

    Liked by 1 person

  35. Tom Hart Avatar
    Tom Hart

    I will try this for sure this evening (on an old, but otherwise-in-good-shape McDonald and Giles LP). I’m pretty sure the problem here is a shallow scratch across grooves, and it’s hard to see how this method could fix that. But I’m game to try! Thanks for the tip.

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      It may help, just running the pick along the grooves can help with the flow of the needle. Best of luck!

      Like

  36. frankenformer Avatar

    I’m glad the toothpick worked for you, but before using wood on vinyl, I would first try using a cotton-tipped swap soaked in alcohol and just rub it gently back and forth in the area of the skip. This is less intrusive to the wax, plus you needn’t have to be so accurate as to exactly where the skip is located. Then wash the area of the skip in dish detergent and warm water. I guarantee this works, and it keeps you from causing more damage with wood – especially if it’s being used to push the dirt or grime further into the vinyl…

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Thank you – that’s an interesting (and good) suggestion

      Like

      1. frankenformer Avatar

        It works for me every time – unless the skip was caused by physical damage; in such cases nothing will save it… but in most cases, it’s just a matter of dislodging a bit of foreign material out of the groove 🙂

        Like

  37. mike Avatar

    I had to leave a comment because I have a 3-album Lee Scratch Perry box set that isn’t that easy to snag called Build the Ark. I love it, but one song at the end of side 1 skipped. It drove me nuts and of course I started avoided playing the first album of the set, even though it’s great. Well anyways, i cleaned it a few times to no avail. I couldn’t notice a scratch or anything so it was frustrating and mysterious. After searching around on google i found this post. I was skeptical. But i tried to identify the area on the record that the skip was occurring at. Eventually I stopped the record and manually found the spot, running it over a few times to confirm. With a magnifying glass I spotted the tiniest speck, like a grain of sand. I didn’t have a toothpick, so broke a chopstick and took a toothpick-sized splinter. I worked it pretty gently, then a little harder. Suddenly i felt it give way. It was tiny but practically glued in there in the groove somehow. I wiped the record off and voila! the skip was gone!!!!! Game changer! Thanks so much.

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      That’s fantastic – and thank you for making the effort to tell us of your success!

      Like

  38. Andy Milner Avatar
    Andy Milner

    I was getting a skip on the Thriller record….. 😦

    Your article saved it!!

    Liked by 1 person

  39. Nick Avatar
    Nick

    You are The Man !!!

    Liked by 1 person

  40. Roger Avatar
    Roger

    Worked perfectly on a Starship – “Knee Deep In The Hoopla” vinyl record I purchased today for 75 cents at a local second-hand store. “We Built This City” classic hit skipped several times about half way through. I grabbed a toothpick, magnifying headgear, headlamp, and five minutes later the song played flawlessly! Thank you so much for helping me save this LP! 😀

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      You are very welcome! Glad it worked for you.

      Like

  41. […] I tried to provide something useful to readers. Maybe they’d have noticed the one about how to fix skips in your vinyl records?  […]

    Like

  42. Jarrod Lawrence Avatar
    Jarrod Lawrence

    This worked for me! I visually inspected the entire record and couldn’t see any scratch or anything. However, with the toothpick, I ended up on a tiny little spot that I thought was a white speck of dust. Turns out, running the toothpick over it, it was hard and crusty and stuck in the crack like dirt. The toothpick loosened it, I cleaned it really good, and it’s perfect now. Thanks!!

    Liked by 1 person

  43. Barry McCockinner Avatar
    Barry McCockinner

    How appropriate ! I have a skipping copy of Bona Drag I need to fix ! Wish me luck

    Liked by 1 person

  44. Fabian Avatar
    Fabian

    Thanks for the tip! Where did you get the image of the toothpick to vinyl? if it’s yours, can I use it?

    Like

  45. Melvin Clapton Avatar

    thanks for the toothpic tip worked a treat cheers
    it was a last ditch attempt appreciated

    Liked by 1 person

  46. Eileen Avatar
    Eileen

    Just tried it on my “Best of the Doors” Quad LP and it worked perfectly. “Riders on the Storm” no longer skips 🙂

    Liked by 1 person

  47. Marilyn Hull - Des Moines, IA USA Avatar
    Marilyn Hull – Des Moines, IA USA

    I am an avid record collector and just played a Ten Years After album that skipped. I originally ran my rectangular record cleaning block over the record first. I took the record off the turntable and examined it under a flashlight. It was dusty throughout the entire record! I excitedly read your tip about cleaning the record with wet fine sandpaper. Not having sandpaper, I used a wet flat ktchen scrubber which I took off a rectangular sponge. I lightly scrubbed the record all around 3-4 times with the wet scrubber. I then thoroughly dried the record with a lint-free cloth. Then I replayed the record. I was truly amazed! Not only were there no pops or static, it played without skipping! From now on, I will thoroughly clean my records with this method before they are played. Thank you so much!

    Liked by 1 person

  48. Niv Siton Avatar
    Niv Siton

    I found this second hand record that kept skipping, so i didn’t mind trying.
    It actually worked! Thanks a lot😁

    Liked by 1 person

  49. Alessandro Reffo Avatar
    Alessandro Reffo

    I bought a vinyl off eBay: pretty good overall but unfortunately one track was jumping due to one of those unlucky short and deep scratches that are almost parallel to the grooves. I thought I got nothing to loose and gave the toothpick method a try… Looking at the record I thought I’ve just made it worse but when I put the record on the turntable I was pretty surprised to see it wasn’t jumping anymore! Whoa thanks a lot mate for the insight – cheers!

    Liked by 1 person

  50. Boo Sephton Avatar
    Boo Sephton

    brilliant reduced a skip to a click in two attempts i can put up with the click johnny cash live at folsom thankyou very much

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Excellent! Glad it worked for you too!

      Like

  51. David Rule Avatar
    David Rule

    Too many comments to read them all. … If nobody’s already said it, Do not try bending a shellac 78. They don’t like it.
    Thanks for the hint. I use the stylus back and forth – this can sometimes tear up the record or worse break the stylus but I’ve been doing that for years. (It doesn’t work with all turntables.)
    My problem is ”Way Back Home” (Instrumental) by Jr. Walker. Every copy I buy is worn out, but even if they were not it does look as though the grooves actually meet in places. Likewise the Stones ”2,000 Light Years From Home” on the mono ”Satanic Majesties” L.P. Fortunately in the latter case they re-cut the grooves a number of times.
    In the case of the Jr. Walker, it’s the heavy bass (typical of too many early 1970s singles), and the tune happens to coincide with the 45 revs. per minute…
    Peter Noone’s ”Oh You Pretty Things” also coincides, with a heavy beat at 45 rpm. but fortunately they toned the bass down or there would have been problems…

    Liked by 1 person

    1. David Rule Avatar
      David Rule

      Yes, I’ve had numerous copies of Way Back Home – I now have two playable ones!! The grooves practically meet but until the wall is broken down by too many plays (badly tracking) the surface speed of the record should keep it on the right line. The fault was evidently serious enough that E.M.I. re-issued it, same number, at the time. Stupidly, instead of simply re-mastering the silly thing with less volume or less bass, they toned it right down and added a totally unnecessary track. The two-track version does not have a problem but it’s too quiet for its own good, allowing in all the surface noise of a typical E.M.I. single. I’ve seen other records with mastering faults – and even one where the grooves definitely do cross but as it is on 78 rpm, the surface speed carries it through o.k., quite amazingly! I’m surprised it got issued. E.M.I. again! – Tracking is the answer. A slight pull on the pick-up will help it, but can also reinforce the fault. Satanic Majesties is the real problem child – because the damn thing is so expensive, I can’t keep buying more and more copies!!! 🙂

      Like

  52. Mike C Avatar
    Mike C

    I found a copy of AC/DC Who made Who cheap and sure enough one of the scratches produced a jump in at least three places! Tried the toothpick method and whilst it did mark the record surface a little it has fixed all the jumps. Marvellous!! Doesn’t seem to have been detrimental to the sound either so for me, this method works a treat!

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Excellent to hear – thank you Mike and a great album to fix as well!

      Like

  53. scoobs22 Avatar

    You are my hero! My copy of Speaking In Tongues had a mean skip in the first 10 seconds, and thanks to you it’s been reduced to a mere pop. And, believe it or not, the pop wasn’t from grime or a scratch. It was an actual manufacturing flaw. I’m shocked that this worked. Thank you, thank you, thank you!

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Very glad to have helped – thank you for letting me know!

      Liked by 1 person

  54. Nate Stephens Avatar

    Does this work with records that have a loop? I came here from Google as my brand new record apparently got thrown around like a frisbee at the shipping warehouse.

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Only one way to find out Nate. But if it is a brand new record you are better off returning it to the shop and asking for a new one.

      Like

  55. Tom Goodrich Avatar
    Tom Goodrich

    I was up for trying this method on my first pressing of Exile on Main Street which had an annoying skip on ‘Happy’. I couldn’t find the spot where the skip occurred for love nor money so resorted to the wood glue cleaning method and hey presto, no more skip. One very happy camper. Now I need to find a way of getting mould spots off labels. Any tips?

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Oof. Mould spots? I’m going to throw that one open…

      Like

    2. Every Record Tells A Story Avatar

      (White Vinegar diluted in distilled water would be my first thought, but I don’t have any mouldy records to try that on).

      Like

      1. Tom Avatar
        Tom

        Interesting idea – I may give that a go.

        Liked by 1 person

      2. Every Record Tells A Story Avatar

        Do let us know how it goes! (NB. I take no responsibility for ruining your records!)

        Like

  56. steve mckeown Avatar
    steve mckeown

    you are amazing……i just fixed my chaity shop copy of rubber soul with this! i love you

    Liked by 1 person

    1. Every Record Tells A Story Avatar

      Haha! Thank you Steve!

      Like

  57. steve mckeown Avatar

    I now just fixed my copy of “let it be” too! it was a “twat” of a triple jump too!

    Liked by 1 person

Leave a reply to Barry McCockinner Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.